Display Attack-Defense Scan Attacker Ipv6 - HP MSR Series Command Reference Manual

IP address
192.168.31.2
2.2.2.3
# (MSR4000.) Display information about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip
Slot 0:
IP address
192.168.31.2
2.2.2.3
Slot 1:
IP address
192.168.31.2
2.2.2.3
# (MSR1000/MSR2000/MSR3000.) Display the number of IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip count
Totally 3 attackers.
# (MSR4000.) Display the number of IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip count
Slot 0:
Totally 3 attackers.
Slot 1:
Totally 3 attackers.
Table 87 Command output
Field
Totally 3 attackers
IP address
VPN instance
DS-Lite tunnel peer
Detected on
Duration(min)
Related commands
display attack-defense scan victim ip
•
scan detect
•

display attack-defense scan attacker ipv6

Use display attack-defense scan attacker ipv6 to display information about IPv6 scanning attackers.
VPN instance DS-Lite tunnel peer
-- --
-- --
VPN instance DS-Lite tunnel peer
-- --
-- --
VPN instance DS-Lite tunnel peer
-- --
-- --
Description
Total number of IPv4 scanning attackers.
IPv4 address of the attacker.
MPLS L3VPN instance to which the attacker's IPv4 address belongs. If the
IPv4 address is on the public network, this field displays hyphens (--).
Peer address of the DS-Lite tunnel.
If the device is the AFTR of a DS-Lite tunnel, this field displays the B4's
address from which the packet comes.
In other situations, this field displays hyphens (--).
Where the attack is detected, on the device (Local) or an interface.
How long the attack lasts, in minutes.
Detected on
GE2/1/2
GE2/1/2
Detected on
GE2/1/2
GE2/1/2
Detected on
GE2/1/2
GE2/1/2
585
Duration(min)
1284
23
Duration(min)
1284
23
Duration(min)
1284
23