Search-Scope; Server-Timeout - HP MSR Series Command Reference Manual

search-scope

Use search-scope to specify the user search scope.
Use undo search-scope to restore the default.
Syntax
search-scope { all-level | single-level }
undo search-scope
Default
The user search scope is all-level.
Views
LDAP server view
Predefined user roles
network-admin
Parameters
all-level: Specifies that the search goes through all subdirectories of the base DN.
single-level: Specifies that the search goes through only the next lower level of subdirectories under the
base DN.
Examples
# Specify the search scope for the LDAP authentication as all subdirectories of the base DN.
<Sysname> system-view
[Sysname] ldap server ccc
[Sysname-ldap-server-ccc] search-scope all-level
Related commands
display ldap scheme
•
ldap server
•

server-timeout

Use server-timeout to set the LDAP server timeout period, the maximum time that the device waits for an
LDAP response.
Use undo server-timeout to restore the default.
Syntax
server-timeout time-interval
undo server-timeout
Default
The LDAP server timeout period is 10 seconds.
Views
LDAP server view
107