Table of Contents
Advertisement
display habp table
Syntax
display habp table [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display habp table command to display HABP MAC address table entries.
This command is only applicable on an HABP server to display the MAC address entries collected by the
HABP server.
Examples
# On the HABP server, display HABP MAC address table entries.
<Sysname> display habp table
MAC
001f-3c00-0030
Table 27 Output description
Field
MAC
Holdtime
Receive Port
display habp traffic
Syntax
display habp traffic [ | { begin | exclude | include } regular-expression ]
View
Any view
Holdtime
Receive Port
53
GigabitEthernet1/0/1
Description
MAC address
Lifetime of an entry in seconds. The initial value is three times the interval to send HABP
request packets. An entry will age out if it is not updated during the period.
Port that learned the MAC address
202
Advertisement
Table of Contents
