D-Link DES-3028 Cli Reference Manual page 64

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P Fast Ethernet Switch Command Line Interface
Copyright(C) 2009 D-Link Corporation. All rights reserved.
DES-3028P:4#
DES-3028P:4#
DES-3028P:4#download cfg_fromTFTP 10.41.44.44 c:\cfg\setting.txt
Command: download cfg_fromTFTP 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process appears like this:
Success.
DES-3028P:4#
DES-3028P:4## ROUTE
DES-3028P:4#
DES-3028P:4#
DES-3028P:4##---------------------------------------------------
DES-3028P:4##
DES-3028P:4##---------------------------------------------------
DES-3028P:4#
DES-3028P:4#
NOTE: With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the show switch command to display the new IP settings status.
disable autoconfig
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To stop the auto configuration function:
Firmware: Build 2.00.B23
End of configuration file for DES-3028P
Use this to deactivate auto configuration from DHCP.
disable autoconfig
This instructs the Switch not to accept auto configuration instruction from
the DHCP server. This does not change the IP settings of the Switch. The
ipif settings will continue as DHCP client until changed with the config ipif
command.
None.
None.
59