D-Link DES-3028 Cli Reference Manual page 291

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
disable igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable IGMP snoop multicast VLAN:
DES-3028P:4#disable igmp_snooping multicast_vlan
Command: disable igmp_snooping multicast_vlan
Success.
DES-3028P:4#
show igmp_snooping multicast_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display IGMP snoop multicast VLAN:
DES-3028P:4# show igmp_snooping multicast_vlan
Command: show igmp_snooping multicast_vlan
VLAN Name
VID
Member(Untagged) Ports
Tagged Member Ports
Source Ports
Status
Replace Source IP
DES-3028P:4#
Used to disable the multicast VLAN function.
disable igmp_snooping multicast_vlan
This command controls the multicast VLAN function. The ISM VLAN
will take effect when igmp snooping multicast vlan is enabled. By
default, the multicast VLAN is in a disabled state.
None.
Only Administrator-level users can issue this command.
Used to show the information of multicast VLAN.
show igmp_snooping multicast_vlan {<vlan_name 32>}
The show igmp_snooping multicast_vlan command allows
you to show the information of multicast VLAN.
<vlan_name 32>  The name of the multicast VLAN to be shown.
None.
: mv1
: 2
: 1,3
: 2
: 4
: Enabled
: 0.0.0.0
286