D-Link DES-3028 Cli Reference Manual page 252

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
To transfer the CS (commander) to be a CaS (candidate):
To transfer the Switch to be a CS:
To update the name of a group:
download sim
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To download firmware:
DES-3028P:4#download sim_ms firmware_from_tftp 10.53.13.94
c:/des3028.had all
DES-3028P:4# config sim candidate
Command: config sim candidate
Success.
DES-3028P:4#
DES-3028P:4# config sim commander
Command: config sim commander
Success.
DES-3028P:4#
DES-3028P:4# config
Trinity
Command: config sim commander group_name Trinity
Success.
DES-3028P:4#
Used to download firmware or configuration file to an indicated device.
download sim_ms [firmware_from_tftp | configuration_from_tftp]
<ipaddr> <path_filename> {members <mslist 1-32> | all}
This command will download a firmware file or configuration file to a
specified device from a TFTP server.
firmware – Specify this parameter to download firmware to members of a
SIM group.
configuration  Specify this parameter to download a switch
configuration to members of a SIM group.
<ipaddr> – Enter the IP address of the TFTP server.
<path_filename> – Enter the path and the filename of the firmware or
switch on the TFTP server.
members – Enter this parameter to specify the members to which the
user prefers to download firmware or switch configuration files. The user
may specify a member or members by adding one of the following:
<mslist>  Enter a value, or values to specify which members of

the SIM group will receive the firmware or switch configuration.

all – Add this parameter to specify all members of the SIM group
will receive the firmware or switch configuration.
Only Administrator-level users can issue this command.
sim commander group_name
247