D-Link DES-3028 Cli Reference Manual page 25

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
To force the Switch to restart:
DES-3028P:4#reboot force_agree
Command: reboot force_agree
Please wait, the switch is rebooting...
reset
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To restore all of the Switch's parameters to their default values:
login
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To initiate the login procedure:
Used to reset the Switch to the factory default settings.
reset {[config | system]} {force_agree}
This command is used to restore the Switch's configuration to the
default settings assigned from the factory.
config  If the keyword 'config' is specified, all of the factory default
settings are restored on the Switch including the IP address, user
accounts, and the switch history log. The Switch will not save or
reboot.
system  If the keyword 'system' is specified all of the factory default
settings are restored on the Switch. The Switch will save and reboot
after the settings are changed to default. Rebooting will clear all
entries in the Forwarding Data Base.
force_agree – When force_agree is specified, the reset command
will be executed immediately without further confirmation.
If no parameter is specified, the Switch's current IP address, user
accounts, and the switch history log are not changed. All other
parameters are restored to the factory default settings. The Switch
will not save or reboot.
Only Administrator-level users can issue this command.
DES-3028P:4#reset config
Command: reset config
Are you sure you
reset?(y/n)
Success.
DES-3028P:4#
Used to log in a user to the Switch's console.
login
This command is used to initiate the login procedure. The user will be
prompted for a Username and Password.
None.
None.
want to proceed
20
with system