D-Link DES-3028 Cli Reference Manual page 171

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
create 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an 802.1X user:
DES-3028P:4#create 802.1x user dtremblett
Command: create 802.1x user dtremblett
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
DES-3028P:4#
show 802.1x user
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view 802.1X users currently configured on the Switch:
DES-3028P:4#show 802.1x user
Command: show 802.1x user
Index
--------------
Darren
Total Entries: 1
DES-3028P:4#
delete 802.1x user
Purpose
Syntax
Description
Used to create a new 802.1X user.
create 802.1x user <username 15>
The create 802.1x user command is used to create new 802.1X
users.
<username 15>  A username of up to 15 alphanumeric characters in
length.
Only Administrator-level users can issue this command.
Used to display the 802.1X user accounts on the Switch.
show 802.1x user
The show 802.1x user command is used to display the 802.1X Port-
based or Host-based Network Access control local users currently
configured on the Switch.
None.
None.
UserName
--------------
Trinity
Used to delete an 802.1X user account on the Switch.
delete 802.1x user <username 15>
The delete 802.1x user command is used to delete the 802.1X Port-
based or Host-based Network Access control local users currently
166