DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show serial_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the serial port setting:
DES-3028P:4#show serial_port
Command: show serial_port
Baud Rate
Data Bits
Parity Bits
Stop Bits
Auto-Logout
DES-3028P:4#
config serial_port
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the baud rate:
DES-3028P:4#config serial_port baud_rate 115200
Command: config serial_port baud_rate 115200
Used to display the current serial port settings.
show serial_port
This command displays the current serial port settings.
None.
None
: 9600
: 8
: None
: 1
: 10 mins
Used to configure the serial port.
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] |
auto_logout [never | 2_minutes | 5_minutes | 10_minutes |
15_minutes]}
This command is used to configure the serial port's baud rate and auto
logout settings.
baud_rate [9600 | 19200 | 38400 | 115200] The serial bit rate that will be
used to communicate with the management host. There are four options:
9600, 19200, 38400, 115200.
never No time limit on the length of time the console can be open with
no user input.
2_minutes The console will log out the current user if there is no user
input for 2 minutes.
5_minutes The console will log out the current user if there is no user
input for 5 minutes.
10_minutes The console will log out the current user if there is no user
input for 10 minutes.
15_minutes The console will log out the current user if there is no user
input for 15 minutes.
Only Administrator-level users can issue this command.
15