D-Link DES-3028 Cli Reference Manual page 227

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
DES-3028P:4#
delete authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the server group "group_1":
DES-3028P:4#delete server_group group_1
Command: delete server_group group_1
Success.
DES-3028P:4#
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view authentication server groups currently set on the Switch.
Used to delete a user-defined authentication server group.
delete authen server_group <string 15>
This command will delete an authentication server group.
<string 15>  Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be deleted.
Only Administrator-level users can issue this command.
Used to view authentication server groups on the Switch.
show authen server_group <string 15>
This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Group Name  The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address  The IP address of the server host.
Protocol  The authentication protocol used by the server host.
<string 15>  Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
None.
222