D-Link DES-3028 Cli Reference Manual page 303

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config lldp basic_tlvs
Description
Parameters
Restrictions
Example usage
To configure the Switch to exclude the system name TLV from outbound LLDP advertisements on all ports:
DES-3028P:4#
enable
Command: config lldp ports all basic_tlvs system_name enable
Success.
DES-3028P:4#
config lldp dot1_tlv_pvid
Purpose
Syntax
Description
Parameters
Restrictions
An active LLDP port on the switch always includes the mandatory data in
its outbound advertisements. And there are four optional data that can be
configured for an individual port or group of ports to exclude one or more
of these data types from outbound LLDP advertisements. The mandatory
data type includes four basic types of information (end of LLDPDU TLV,
chassis ID TLV, port ID TLV, Time to Live TLV). The mandatory type can
not be disabled. There are also four data types which can be optionally
selected. They are port_description, system_name, system_description,
and system_capability.
<portlist>  Specified a range of ports to be configured.
all  To set all ports in the system, you may use the "all" parameter.
port_description  This TLV optional data type indicates that LLDP agent
should transmit 'Port Description TLV on the port.
The default state is disabled.
system_name  This TLV optional data type indicates that the LLDP
agent should transmit 'System Name TLV'. The default state is disabled.
system_description  This TLV optional data type indicates that the LLDP
agent should transmit 'System Description TLV'. The default state is
disabled.
system_capabilities  This TLV optional data type indicates that the
LLDP agent should transmit 'System Capabilities TLV'. The system
capability will indicate whether the device provides repeater, bridge, or
router functions, and whether the provided functions are currently
enabled. The default state is disabled.
Only Administrator-level users can issue this command.
config lldp ports
Used to configure an individual port or group of ports to exclude one or
more of IEEE 802.1 Organizationally port vlan ID TLV data types come
from outbound LLDP advertisements.
config lldp ports [<portlist>|all] dot1_tlv_pvid [enable | disable]
This TLV optional data type determines whether the IEEE 802.1
organizationally defined port VLAN TLV transmission is allowed on a
given LLDP transmission capable port.
<portlist>  Specified a range of ports to be configured.
all  To set all ports in the system, you may use the "all" parameter.
dot1_tlv_pvid  This TLV optional data type determines whether the IEEE
802.1 organizationally defined port VLAN ID TLV transmission is allowed
on a given LLDP transmission capable port. The default state is disable.
Only Administrator-level users can issue this command.
all basic_tlvs
298
system_name