D-Link DES-3028 Cli Reference Manual page 257

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config smtp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the SMTP settings:
DES-3028:4#config smtp server 166.99.66.33 server_port 25 add
mail receiver darren_tremblett@nhl.com
Command: config smtp server 166.99.66.33 server_port 25 add
mail receiver darren_tremblett@nhl.com
Success.
DES-3028:4#
show smtp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To view the SMTP parameters currently configured on the Switch:
Used to configure necessary information in setting up the Switch
as an SMTP client.
config smtp {server <ipaddr> | server_port <tcp_port_number
1-65535> | self_mail_addr <mail_addr 64> | [add mail_receiver
<mail_addr 64> | delete mail_receiver <index 1-8>]}
This command will allow the user to set the necessary parameters
to configure the SMTP server and mail recipients. This command
must be completely configured properly for the SMTP function of
the switch to correctly operate.
server <ipaddr>  Enter the IP address of the SMTP server on a
remote device.
server_port <tcp_port_number 1-65535>  Enter the virtual port
number that the Switch will connect with on the SMTP server. The
common port number for SMTP is 25.
self_mail_addr <mail addr 64>  Enter the e-mail address from
which mail messages will be sent. This address will be the from
address on the e-mail message sent to a recipient. Only one self
mail address can be configured for this Switch. This string can be
no more that 64 alphanumeric characters.
add mail_receiver <mail_addr 64>  Choose this parameter to add
mail recipients to receive e-mail messages from the Switch. Up to
8 e-mail addresses can be added per Switch.
delete mail_receiver <index 1-8>  Choose this parameter to
delete mail recipients from the configured list receiving e-mail
messages from the Switch. Up to 8 e-mail addresses can be
added per Switch.
Only Administrator-level users can issue this command.
Used to view configured parameters for the SMTP function on the
Switch.
show smtp
This command will display parameters configured for SMTP on the
Switch, including server information, mail recipients and the
current running status of SMTP on the Switch.
None.
Only Administrator-level users can issue this command.
252