D-Link DES-3028 Cli Reference Manual page 250

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
reconfig
Restrictions
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
DES-3028P:4#reconfig
Command: reconfig
DES-3028P:4#
config sim_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To add a member:
DES-3028P:4#config sim_group add 2
Command: config sim_group add 2
Please wait for ACK...
GM Config Success !!!
Success.
DES-3028P:4#
To delete a member:
DES-3028P:4# config sim_group delete 1
Command: config sim_group delete 1
Please wait for ACK...
Success.
DES-3028P:4#
Only Administrator-level users can issue this command.
member_id 2
member_id 2
Used to add candidates and delete members from the SIM group.
config sim_group [add <candidate_id 1-100> {<password>} |
delete <member_id 1-32>]
This command is used to add candidates and delete members from
the SIM group by ID number.
add <candidate_id 1-100> <password>  Use this parameter to
change a candidate switch (CaS) to a member switch (MS) of a SIM
group. The CaS may be defined by its ID number and a password (if
necessary).
delete <member_id 1-32>  Use this parameter to delete a member
switch of a SIM group. The member switch should be defined by ID
number.
Only Administrator-level users can issue this command.
245