D-Link DES-3028 Cli Reference Manual page 293

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config mcast_filter_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure an mcast filter profile:
DES-3028P:4#
225.1.1.1 - 225.1.1.1
Command: config mcast_filter_profile profile_id 2 add 225.1.1.1 -
225.1.1.1
Success.
DES-3028P:4#
delete mcast_filter_profile
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete a multicast address profile:
DES-3028P:4# delete mcast_filter_profile profile_id
Command: delete mcast_filter_profile profile_id
Success.
DES-3028P:4#
delete mcast_filter_profile
Purpose
Syntax
This command configures a multicast addresses profile.
config mcast_filter_profile
profile_name <name> ] { profile_name <name> | [add | delete ]
<mcast_address_list>}
This command is used to configure the multicast filter profiles.
profile_id  ID of the profile.
profile_name  Provides a meaningful description for the profile.
<mcast_address_list>  List of the multicast addresses to be put in
the profile.
You can either specify a single multicast IP address or a range of
multicast addresses.
Only Administrator-level users can issue this command.
config mcast_filter_profile
This command deletes a multicast address profile.
delete mcast_filter_profile profile_id [<value 1-24> | all]
This command deletes a multicast address profile
profile_id  ID of the profile
all  All multicast address profiles will be deleted.
Only Administrator-level users can issue this command.
This command deletes a multicast address profile.
delete mcast_filter_profile profile_name <name 1-32>
288
[profile_id < value
profile_id
3
3
1-24>|
2 add