D-Link DES-3028 Cli Reference Manual page 256

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
The SMTP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following
table.
Command
enable smtp
disable smtp
config smtp
show smtp
smtp send_testmsg
Each command is listed, in detail, in the following sections.
enable smtp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SMTP on the Switch.
DES-3028:4#enable smtp
Command: enable smtp
Success.
DES-3028:4#
disable smtp
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SMTP on the Switch.
Parameters
{server <ipaddr> | server_port <tcp_port_number 1-65535> |
self_mail_addr <mail_addr 64> | [add mail_receiver <mail_addr
64> | delete mail_receiver <index 1-8>]}
Used to enable the Switch as a SMTP client.
enable smtp
This command, in conjunction with the disable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
None.
Only Administrator-level users can issue this command.
Used to disable the Switch as a SMTP client.
disable smtp
This command, in conjunction with the enable smtp command
will enable and disable the Switch as a SMTP client without
changing configurations.
None.
Only Administrator-level users can issue this command.
DES-3028:4#disable smtp
Command: disable smtp
Success.
DES-3028:4#
251