D-Link DES-3028 Cli Reference Manual page 308

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
show lldp ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage
To display the LLDP per port TLV option configuration:
DES-3028P:4# show lldp ports 1
Command: show lldp ports 1
Port ID
----------------------------------------------------------------------
Admin Status
Notification Status
Advertised TLVs Option
Port Description
System Name
System Description
System Capabilities
Enabled Management Address
(NONE.)
Port VLAN ID
Enabled VLAN Name
(NONE.)
Enabled protocol_identity
(NONE.)
MAC/PHY Configuration/Status
Link Aggregation
Maximum Frame Size
DES-3028P:4#
show lldp local_ports
Purpose
Syntax
Description
Parameters
Display the LLDP per port configuration for advertisement options.
show lldp ports {<portlist> }
This command displays
advertisement options.
<portlist>  Specifies a range of ports to be displayed.
When port list is not specified, information for all ports will be displayed.
None.
: 1
: TX_and_RX
: Disable
:
Used to display the per-port information currently available for populating
outbound LLDP advertisements.
show lldp local_ports {<portlist>} {mode [brief | normal | detailed]}
This command displays the per-port information currently available for
populating outbound LLDP advertisements.
<portlist>  Specified a range of ports to be configured. When a port list
is not specified, information for all ports will be displayed.
brief  Display the information in brief mode.
normal  Display the information in normal mode. This is the default
display mode.
detailed  Display the information in detailed mode.
the LLDP per port
303
configuration for
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable