D-Link DES-3028 Cli Reference Manual page 269

Managed 10/100mbps fast
Hide thumbs Also See for DES-3028:
Table of Contents

Advertisement

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
config gratuitous_arp periodical_send
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure gratuitous ARP intervals for the IPIF System:
DES-3028P:4#config
interval 5
Command:
interval 5
Success.
DES-3028P:4#
enable gratuitous_arp trap and log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the System's interface gratuitous ARP log and trap:
DES-3028P:4#enable gratuitous_arp System trap log
Command: enable gratuitous_arp System trap log
Success.
DES-3028P:4#
disable gratuitous_arp trap and log
Purpose
Syntax
Description
Parameters
Used to configure the interval for periodical sending of gratuitous ARP
request packets.
config gratuitous_arp send periodically ipif <ipif_name 12> interval
<value 0-65535>
This command is used to configure the interval for periodical sending of
gratuitous ARP request packets. By default, the interval is 0.
<ipif_name 12>  Interface name of L3 interface.
<value 0-65535>  Periodically send gratuitous ARP interval time in
seconds. 0- means it will not send gratuitous ARP periodically.
Only Administrator-level users can issue this command.
gratuitous_arp
config
gratuitous_arp
Used to enable the gratuitous ARP trap and log.
enable gratuitous_arp {ipif <ipif_name 12>} {trap |log}
The command is used to enable gratuitous ARP trap and log states. The
switch can trap and log the IP conflict event to inform the administrator.
By default, the trap is disabled and event log is enabled.
<ipif_name 12>  Interface name of L3 interface.
Only Administrator-level users can issue this command.
Used to disable the gratuitous ARP trap and log.
disable gratuitous_arp {ipif <ipif_name 12>} {trap |log}
The command is used to disable the gratuitous ARP trap and log states.
The switch can trap and log the IP conflict event to inform the
administrator. By default, the trap is disabled and event log is enabled.
<ipif_name 12>  Interface name of L3 interface.
send
periodically
send
periodically
264
ipif
System
ipif
System

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Des-3052Des-3052pDes-3028pDes-3028g

Table of Contents