D-Link DES-3028 Cli Reference Manual page 262

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
show poe system
Parameters
Restrictions
Example usage:
To display the power settings for the switch system:
DES-3028P:4#show poe system
Command: show poe system
PoE System Information
---------------------------------------------------
Power Limit
Power Consumption
Power Remained
Power Disconnection Method : Deny Next Port
If power disconnection method is set to deny next port, then the
system can not
utilize out of its maximum power capacity. The maximum unused watt is
19W.
DES-3028P:4#
Example usage:
To display the power settings for the switch's ports
system – Choosing this parameter will display the system settings for
PoE, such as switch power limit, consumption, remaining useable
power and the power disconnection method.
ports – Choosing this parameter will display the settings for PoE on
a port-by-port basis.
<portlist> – Enter a port or range of ports to be displayed for
their PoE settings.
None.
: 185(watts)
: 0(watts)
: 185(watts)
257