D-Link DES-3028 Cli Reference Manual page 186

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Switch CLI Reference Manual
To show the CPU filtering state on the Switch:
DES-3028P:4#show cpu access_profile profile_id 2
Command: show cpu access_profile profile_id 2
CPU Interface Filtering state: Disabled
Access Profile Table
=============================================
Total Profile Entries: 0
Total Rule Entries:
DES-3028P:4#
enable cpu_interface_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To enable CPU interface filtering:
DES-3028P:4#enable cpu_interface_filtering
Command: enable cpu_interface_filtering
Success.
DES-3028P:4#
disable cpu_interface_filtering
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To disable CPU filtering:
DES-3028P:4#disable cpu_interface_filtering
Command: disable cpu_interface_filtering
Success.
DES-3028P:4#
0
Used to enable CPU interface filtering on the Switch.
enable cpu_interface_filtering
This command is used, in conjunction with the disable
cpu_interface_filtering command below, to enable and disable CPU
interface filtering on the Switch.
None.
Only Administrator-level users can issue this command.
Used to disable CPU interface filtering on the Switch.
disable cpu_interface_filtering
This command is used, in conjunction with the enable
cpu_interface_filtering command above, to enable and disable
CPU interface filtering on the Switch.
None.
Only Administrator-level users can issue this command.
181