Adjusting Bonnet - Volkswagen Tiguan 2016 Workshop Manual

Tiguan 2016 ➤ , Tiguan RUS 2017 ➤
General body repairs, exterior - Edition 01.2018
1.5

Adjusting bonnet

Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
Note
Vehicle must be standing on its wheels to enable bonnet to be adjusted.
♦
The adjusting buffers -2- on the left and right are not a means of adjustment. They have the function of
♦
stabilising and damping the bonnet.
The bonnet is correctly adjusted when all shut lines are even when closed. The bonnet must not protrude
♦
too far inwards or outwards. The contours must also be flush with each other.
The bonnet must engage into the lid lock without excessive force.
♦
34
Rep. gr.55 - Bonnet, rear lid