Golf 2015 ➤ , Golf Variant 2015 ➤
Electrical Equipment - Edition 12.2015
Note
If only one headlamp was removed, then the front bumper
♦
cover must be loosened only on the respective side.
If both headlamps are removed, then the front bumper must
♦
be completely removed. Refer to ⇒ Body Exterior; Rep. Gr.
63 ; Front Bumper; Bumper Cover, Removing and Installing .
The removal and installation is described for the left side. Re‐
moving and installing on the right side is identical.
Removing
– Turn off the ignition and all electrical equipment.
– Remove the ignition key, if equipped.
– Remove the radiator grille. Refer to ⇒ Body Exterior; Rep. Gr.
66 ; Radiator Grille/Front Trim; Radiator Grille, Removing and
Installing .
Caution
There is a risk of damaging the components.
♦ Carefully remove the bumper cover. Make sure that the
bumper cover is not deformed or ripped.
♦ When removing the headlamp the surface can be scratch‐
ed. Tape up those components which could be damaged.
– Remove the bolts -3- from the front wheel housing liner.
102
Rep. Gr.94 - Exterior Lights, Switches