Volkswagen Golf 2015 Repair Manual page 161

– Turn the bulb socket -1- in the direction of the -arrow A-.
– Remove the bulb socket in the direction of the -arrow B- from
the tail lamp.
– Remove the bulb for the back-up lamp.
Installing
Install in the reverse order of removal while paying attention to
the following:
Caution
There is a risk of damaging the lamp.
♦ Do not touch glass cone of bulb with bare fingers. Fingers
will leave traces of grease on the glass which, when the
bulb is switched on, will evaporate and cloud the glass.
♦ Use clean cloth gloves to insert the bulbs.
– Perform a function test.
4.9.2 Back-Up Lamp Bulb, Removing and In‐
stalling, Wagon
The removal and installation is described for the left side. Re‐
moving and installing on the right side is identical.
Removing
– Turn off the ignition and all electrical equipment.
– Remove the ignition key, if equipped.
Caution
Risk of damaging the component surfaces.
♦ When positioning a prying tool, put for example commer‐
cially available adhesive tape over the component in the
visible area.
– If necessary insert a narrow screwdriver in the opening on the
side -1-.
– Remove the cover -2- in the direction of the -arrow A-.
Golf 2015 ➤ , Golf Variant 2015 ➤
Electrical Equipment - Edition 12.2015
153
4. Tail Lamps