Volkswagen Golf 2015 Repair Manual page 172

Golf 2015 ➤ , Golf Variant 2015 ➤
Electrical Equipment - Edition 12.2015
– Turn the lamp socket -1- in the direction of -arrow- to release
it and pull it out of the license plate lamp.
Installing
Installation is performed in the reverse order of removal, noting
the following:
Caution
There is a risk of damaging the lamp.
♦ Do not touch glass cone of bulb with bare fingers. Fingers
will leave traces of grease on the glass which, when the
bulb is switched on, will evaporate and cloud the glass.
♦ Use clean gloves for example to insert the bulbs.
– Perform a function test.
6.2.2 Left/Right License Plate Lamp Bulb -
X4- / -X5- , Removing and Installing,
Wagon
The entire license plate lamp must be replaced if a license plate
lamp LED is faulty.
Removing
– Turn off the ignition and all electrical equipment.
– Remove the ignition key, if equipped.
– Remove the license plate lamp. Refer to
⇒ "6.1.3 Left/Right License Plate Lamp X4 / X5 , Removing
and Installing, Wagon with Bulb", page 162
– If equipped, unclip the glass base bulb cover -1- from the li‐
cense plate lamp.
164
Rep. Gr.94 - Exterior Lights, Switches
.