Volkswagen Golf 2015 Repair Manual page 231

1 - Volkswagen Logo
❑ The laser pointer is
aligned on the center of
the Volkswagen logo
2 - Calibration Tool - Wheel
Center Mountings -
VAS6350/1-
❑ With 17 mm wheel bolt
adapter and measure
paddle
3 - Calibration Tool - Lane
Change Calibration Tool -
VAS6350/4-
❑ Is moved from the left to
the right side of measur‐
ing field during calibra‐
tion
❑ When installed correct‐
ly, vehicle electrical sys‐
tem voltage line must be
connected at bottom left
of calibration device (as
seen in direction of trav‐
el)
❑ Height of the upper
edge of the calibration
device to the floor
♦ Sedan: 606 mm
♦ Wagon: 618 mm
4 - Calibration Unit -
VAS6350A-
5 - Calibration Tool - Linear La‐
ser - VAS6350/3-
❑ With "laser protective
eyewear"
❑ On the Calibration Unit - VAS6350A-
❑ Turning on and off. Refer to the Operating Instructions.
6 - Plastic Foot
❑ Quantity: 3
❑ Can be adjusted when setting the horizontal position of the Calibration Unit - VAS6350A-
7 - Calibration Tool - Spacing Laser - VAS6350/2-
❑ For distance measurement
❑ Usage information. Refer to the Operating Instructions.
8 - Measuring Scale
❑ For positioning the Calibration Tool - Lane Change Calibration Tool Calibration Tool - Lane Change
Calibration Tool - VAS6350/4- .
❑ Dimension to be adjusted measuring point on steel ruler
♦ Sedan: 621 mm
♦ Wagon: 678 mm
9 - Level
❑ On the Calibration Unit - VAS6350A-
❑ To check the horizontal position of the Calibration Unit - VAS6350A-
Golf 2015 ➤ , Golf Variant 2015 ➤
Electrical Equipment - Edition 12.2015
13. Blind Spot Detection
223