Table of Contents
Advertisement
1.
PREFACE
1.1.
INTRODUCTION
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2.
PRODUCT INTRODUCTION
Promig 501 and Promig 511 are wire feeders designed for demanding professional use. Promig
501 and Promig 511 are based on same technical solutions. Promig 511 has as additional
characteristic an integrated swing arm for gun which makes working easier.
Versatile and easy to use operation functions of PROMIG units have been realized with
interchangeable control panels which point out different characteristics:
MC:
basic controls and displays for MIG/MMA welding, Selecto memories
ML:
basic controls and displays for MIG/MMA welding,Synergic MIG/PULSED MIG
Operations of wire feed unit are controlled and adjusted with microprocessor. Tacho generator of
wire feed motor enables accurate and even adjustment of wire feed speed.
These operation instructions handle Promig 501 and Promig 511 wire feed units, assembly and
installation of MIG system as well as operation functions of panels.
This equipment's electromagnetic compatibility (EMC) is designed for use in an
industrial environment. Class A equipment is not intended for use in residential location
where the electrical power is provided by the public low-voltage supply system.
© KEMPPI OY
PROMIG 501, PROMIG 511/0537 – 3
Advertisement
Table of Contents
