Tektronix AFG2021 Programmer's Manual page 94

Command Descriptions
[SOURce[1]]:VOLTage:LIMit:HIGH
Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:VOLTage:LIMit:LOW
Group
Syntax
Arguments
Returns
2-76
This command sets or queries the higher limit of the output amplitude high level
for the specified channel.
Source
[SOURce[1]]:VOLTage:LIMit:HIGH
[SOURce[1]]:VOLTage:LIMit:HIGH
<voltage>::=<NRf>[<units>]
where:
<NRf> is the higher limit of output amplitude.
<units>::=[mV | V]
<voltage>
SOURce1:VOLTage:LIMit:HIGH 1V
sets the higher limit of CH 1 output amplitude to 1 V.
This command sets or queries the lower limit of the output amplitude low level
for the specified channel.
Source
[SOURce[1]]:VOLTage:LIMit:LOW
[SOURce[1]]:VOLTage:LIMit:LOW
<voltage>::=<NRf>[<units>]
where:
<NRf> is the lower limit of output amplitude.
<units>::=[mV | V]
<voltage>
AFG2021 Arbitrary Function Generator Programmer Manual
{<voltage>|MINimum|MAXimum}
? {MINimum|MAXimum}
{<voltage>|MINimum|MAXimum}
? {MINimum|MAXimum}