Tektronix AFG2021 Programmer's Manual page 89

Group
Syntax
Related Commands
Arguments
Returns
Examples
[SOURce[1]]:SWEep:RTIMe
Group
Syntax
Arguments
AFG2021 Arbitrary Function Generator Programmer Manual
The query command returns the sweep mode for the specified channel.
Source
[SOURce[1]]:SWEep:MODE
[SOURce[1]]:SWEep:MODE?
[SOURce[1]]:SWEep:HTIMe,
[SOURce[1]]:SWEep:RTIMe,
[SOURce[1]]:SWEep:TIME
TRIGger[:SEQuence]:SOURce,
TRIGger[:SEQuence]:TIMer
AUTO sets the sweep mode to auto. The instrument outputs a continuous sweep
at a rate specified by Sweep Time, Hold Time, and Return Time.
MANual sets the sweep mode to manual. The instrument outputs one sweep
when a trigger input is received.
AUTO|MAN
SOURce1:SWEep:MODE AUTO
sets the CH1 sweep mode to auto. The instrument outputs a continuous sweep.
This command sets or queries the sweep return time. Return time represents the
amount of time from stop frequency through start frequency. Return time does
not include hold time.
Source
[SOURce[1]]:SWEep:RTIMe
[SOURce[1]]:SWEep:RTIMe
<seconds>::=<NRf>[<units>]
where:
{AUTO|MANual}
,
{<seconds>|MINimum|MAXimum}
? {MINimum|MAXimum}
Command Descriptions
2-71