Tektronix AFG2021 Programmer's Manual page 44

Command Descriptions
Group
Syntax
Arguments
Returns
Examples
MEMory:STATe:RECall:AUTo
Group
Syntax
Arguments
Returns
2-26
Memory
MEMory:STATe:LOCK
MEMory:STATe:LOCK?
1, 2, 3, or 4 specifies the setup memory to locked or queried.
ON or <NR1>≠0 locks the specified location of setup memory.
OFF or <NR1>=0 allows you to overwrite or delete the specified location of
setup memory.
<NR1>
MEMORY:STATE:LOCK 1,ON
locks the setup memory of location number 1.
This command sets or queries whether to enable the automatic recall of last
setup memory when powered-on. The next time you apply the power, the
instrument will automatically recall the settings you used when you powered
off the instrument.
If you select OFF, the default setups are recalled when you power on the
instrument.
Memory
MEMory:STATe:RECall:AUTo
MEMory:STATe:RECall:AUTo?
OFF or <NR1>=0 disables the last setup recall function.
ON or <NR1>≠0 enables the recall of the setup memory last used before the
instrument was powered off.
<NR1>
AFG2021 Arbitrary Function Generator Programmer Manual
{1|2|3|4},{ON|OFF|<NR1>}
{1|2|3|4}
{ON|OFF|<NR1>}