Tektronix AFG2021 Programmer's Manual page 93

Returns
Examples
[SOURce[1]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
Group
Syntax
Arguments
Returns
Examples
AFG2021 Arbitrary Function Generator Programmer Manual
<voltage>
SOURce1:VOLTage:LEVel:IMMediate:OFFSet 500mV
sets the CH 1 offset level to 500 mV.
This command sets or queries the output amplitude for the specified channel.
Units
VPP
VRMS
DBM
You can set the units of output amplitude by using either the bezel menu selection
or the [SOURce[1]]:VOLTage:UNIT command. The selection by bezel menu
has priority over the remote command.
Source
[SOURce[1]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
{<amplitude>|MINimum|MAXimum}
[SOURce[1]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
{MINimum|MAXimum}
<amplitude>::=<NRf>[<units>]
where:
<NRf> is the output amplitude.
<units>::=[VPP | VRMS | DBM]
<amplitude>
SOURce1:VOLTage:LEVel:IMMediate:AMPLitude 1V
sets the CH 1output amplitude to 1 V.
Command Descriptions
Amplitude resolution
0.1 mVp-p or four digits
0.1 mVrms or four digits
0.1 dBm
?
2-75