Tektronix AFG2021 Programmer's Manual page 34

Command Groups
2-16
Trace Commands. Trace commands let you set the edit memory and user
waveform memory. The following table lists and describes the Trace commands.
Table 2-15: Trace commands
Header
TRACe|DATA:CATalog?
TRACe|DATA:COPY
TRACe|DATA[:DATA]
TRACe|DATA[:DATA]:LINE
TRACe|DATA[:DATA]:VALue
TRACe|DATA:DEFine
TRACe|DATA:DELete[:NAME]
TRACe|DATA:LOCK[:STATe]
TRACe|DATA:POINts
Trigger Commands. Trigger commands let you control all aspects of instrument
triggering. The following table lists and describes the Trigger commands.
Table 2-16: Trigger commands
Header
ABORt
*TRG
TRIGger[:SEQuence][:IMMediate]
TRIGger:SEQuence:SLOPe
TRIGger[:SEQuence]:SOURce
TRIGger[:SEQuence]:TIMer
Screen Copy. Screen copy command copies screen image and saves it to a file.
Table 2-17: Screen copy command
Header
HCOPy:SDUMp[:IMMediate]
AFG2021 Arbitrary Function Generator Programmer Manual
Description
Return user waveform memory status
Copy edit memory (or user waveform
memory) content to user waveform memory
(or edit memory)
Set/query waveform data to edit memory
Write waveform data with interpolation
Set/query waveform data in edit memory
Set edit memory content
Delete user waveform memory contents
Set/query lock/unlock of user waveform
memory
Set/query number of points for waveform
data in edit memory
Description
Initialize trigger system
Force trigger event
Generate a trigger event
Set/query the slope of trigger signal
Set/query the source of trigger signal
Set/query the period of internal clock
Description
Copy screen image and save the file to USB
memory.