Tektronix AFG2021 Programmer's Manual page 53

OUTPut:TRIGger:MODE
Group
Syntax
Arguments
Returns
Examples
*PSC
Group
Syntax
AFG2021 Arbitrary Function Generator Programmer Manual
This command sets or queries the mode (trigger or sync) for Trigger Output signal.
When the burst count is set to Inf-Cycles in burst mode, TRIGger indicates
that the infinite number of cycles of waveform will be output from the Trigger
Output connector.
When the burst count is set to Inf-Cycles in burst mode, SYNC indicates that one
pulse waveform is output from the Trigger Output connector when the Inf-Cycles
starts.
When Run Mode is specified other than Burst Inf-Cycles, TRIGger and SYNC
have the same effect.
Output
OUTPut:TRIGger:MODE
OUTPut:TRIGger:MODE?
TRIGger means TRIGger is selected for Trigger Out.
SYNC means SYNC is selected for Trigger Out.
TRIG|SYNC
OUTPUT:TRIGGER:MODE SYNC
outputs one cycle waveform from the Trigger Output connector when Inf-Cycles
starts.
This command sets and queries the power-on status flag that controls the
automatic power-on execution of SRER and ESER. When *PSC is true, SRER
and ESER are set to 0 at power-on. When *PSC is false, the current values in the
SRER and ESER are preserved in nonvolatile memory when power is shut off
and are restored at power-on.
Status
*PSC
<NR1>
*PSC?
{TRIGger|SYNC}
Command Descriptions
2-35