Tektronix AFG2021 Programmer's Manual page 71

Returns
Examples
[SOURce[1]]:FSKey:SOURce
Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:FSKey:STATe
Group
Syntax
Arguments
AFG2021 Arbitrary Function Generator Programmer Manual
<rate>
SOURce1:FSKey:INTernal:RATE 50Hz
sets the CH 1 internal modulation rate to 50 Hz.
This command sets or queries the source of modulation signal of FSK modulation
for the specified channel.
Source
[SOURce[1]]:FSKey:SOURce [INTernal|EXTernal]
[SOURce[1]]:FSKey:SOURce?
INTernal means that the carrier waveform is modulated with an internal source.
EXTernal means that the carrier waveform is modulated with an external source.
INT|EXT
SOURce1:FSKey:SOURce INTernal
sets the CH 1 source of modulating signal to internal.
This command enables or disables FSK modulation. The query command returns
the state of FSK modulation. You can select a sine, square, ramp, or arbitrary
waveform for the carrier waveform.
Source
[SOURce[1]]:FSKey:STATe
[SOURce[1]]:FSKey:STATe?
ON or <NR1>≠0 enables FSK modulation.
OFF or <NR1>=0 disables FSK modulation.
{ON|OFF|<NR1>}
Command Descriptions
2-53