Tektronix AFG2021 Programmer's Manual page 65

Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:FM:STATe
Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:FREQuency:CENTer
AFG2021 Arbitrary Function Generator Programmer Manual
Source
[SOURce[1]]:FM:SOURce
[SOURce[1]]:FM:SOURce?
INTernal means that the carrier waveform is modulated with the internal source.
EXTernal means that the carrier waveform is modulated with an external source.
INT|EXT
SOURce1:FM:SOURce INTernal
sets the CH 1 source of modulating signal to internal.
This command enables or disables FM modulation. The query command returns
the state of FM modulation.
Source
[SOURce[1]]:FM:STATe
[SOURce[1]]:FM:STATe?
ON or <NR1>≠0 enables FM modulation.
OFF or <NR1>=0 disables FM modulation.
<NR1>
SOURce1:FM:STATe ON
enables the CH 1 FM modulation.
This command sets or queries the center frequency of sweep for the specified
channel. This command is always used with the [SOURce[1]]:FREQuency:SPAN
command. The setting range of center frequency depends on the waveform
selected for sweep.
[INTernal|EXTernal]
{ON|OFF|<NR1>}
Command Descriptions
2-47