Tektronix AFG2021 Programmer's Manual page 52

Command Descriptions
OUTPut[1]:POLarity
Group
Syntax
Arguments
Returns
Examples
OUTPut[1][:STATe]
Group
Syntax
Arguments
Returns
Examples
2-34
This command inverts a specified output waveform relative to the offset level.
The query command returns the polarity for the specified channel.
Output
OUTPut[1]:POLarity
OUTPut[1]:POLarity?
NORMal sets the specified output waveform polarity to Normal.
INVerted sets the specified output waveform polarity to Inverted.
NORM|INV
OUTPut1:POLarity NORMal
sets the CH 1 waveform polarity to Normal.
This command sets or query whether to enable the instrument output for the
specified channel.
Output
OUTPut[1][:STATe]
OUTPut[1][:STATe]?
ON or <NR1>≠0 enables the instrument output.
OFF or <NR1>=0 disables the instrument output.
<NR1>
sets the instrument CH 1 output to ON.
OUTPUT1:STATE ON
AFG2021 Arbitrary Function Generator Programmer Manual
{NORMal|INVerted}
{ON|OFF|<NR1>}