Tektronix AFG2021 Programmer's Manual page 80

Command Descriptions
Arguments
Returns
Examples
[SOURce[1]]:PULSe:DELay
Group
Syntax
Related Commands
Arguments
Returns
Examples
2-62
<percent>::=<NR2>[<units>]
where:
<NR2> is the duty cycle.
<units>::=PCT
<percent>
SOURce1:PULSe:DCYCle 80.5
sets the duty cycle of the pulse waveform on CH 1 to 80.5%.
This command sets or queries the lead delay of the pulse waveform for the
specified channel.
Source
[SOURce[1]]:PULSe:DELay
[SOURce[1]]:PULSe:DELay
<delay>::=<NR2>[<units>]
where:
<NR2> is the lead delay.
<units>::=[ns | μs | ms | s]
Setting range:
0 ns to Pulse Period (Continuous mode)
0 ns to Pulse Period - {Pulse Width + 0.8 × (Leading Edge Time + Trailing Edge
Time)} (Triggered/Gated burst mode)
<delay>
SOURce1:PULSe:DELay 20ms
sets the CH 1 lead delay to 20 ms.
AFG2021 Arbitrary Function Generator Programmer Manual
{<delay>|MINimum|MAXimum}
? {MINimum|MAXimum}