Tektronix AFG2021 Programmer's Manual page 83

Returns
Examples
[SOURce[1]]:PULSe:WIDTh
Group
Syntax
Related Commands
Arguments
Returns
Examples
AFG2021 Arbitrary Function Generator Programmer Manual
<units>::=[ns | μs | ms | s]
<seconds>
SOURce1:PULSe:TRANsition:TRAiling 200ns
sets the trailing edge time to 200 ns.
This command sets or queries the pulse width for the specified channel.
Pulse Width = Period × Duty Cycle / 100
The pulse width must be less than the period. The setting range is 0.001% to
99.999% in terms of duty cycle.
Pulse Width ≤ Pulse Period - 0.8 × (Leading Edge Time + Trailing Edge Time)
Pulse Width ≥ 0.625 × (Leading Edge Time + Trailing Edge Time)
Source
[SOURce[1]]:PULSe:WIDTh
[SOURce[1]]:PULSe:WIDTh
[SOURce[1]]:PULSe:DCYCle
<seconds>::=<NRf>[<units>]
where:
<NRf> is the pulse width.
<units>::=[ns | μs | ms | s]
<seconds>
SOURce1:PULSe:WIDTh 200ns
sets the CH 1 pulse width to 200 ns.
{<seconds>|MINimum|MAXimum}
? {MINimum|MAXimum}
Command Descriptions
2-65