Tektronix AFG2021 Programmer's Manual page 74

Command Descriptions
Returns
Examples
[SOURce[1]]:PHASe[:ADJust]
Group
Syntax
Arguments
2-56
If you specify EFILe when there is no EFILe or the EFILe is not yet defined,
this command causes an error.
If you change the type of output waveform, it might change the output frequency
because changing waveform types impacts the setting range of output frequency.
USER[1]|USER2|USER3|USER4|EMEMory A user defined waveform saved
in the user waveform memory or the EMEMory can be selected as an output
waveform.
EFILe EFILe is specified as an output waveform.
SIN|SQU|PULS|RAMP|PRN|DC|SINC|GAUS|LOR|ERIS|
EDEC|HARV|USER1|USER2|USER3|USER4|EMEMory|EFILe
SOURce1:FUNCtion:SHAPe SQUare
selects the shape of CH 1 output waveform to square waveform.
This command sets or queries the phase of output waveform for the specified
channel. You can set the value in radians or degrees. If no units are specified, the
default is RAD. The query command returns the value in RAD.
This command is supported when you select a waveform other than DC, Noise,
and Pulse.
Source
[SOURce[1]]:PHASe[:ADJust]
[SOURce[1]]:PHASe[:ADJust]
<phase>::=<NR3>[<units>]
where:
<NR3> is the phase of output frequency.
<units>::=[RAD | DEG]
If <units> are omitted, RAD is specified automatically. The setting ranges are:
RAD: -2 PI to +2 PI, relative to phase value
DEG: -360 to +360, relative to phase value
AFG2021 Arbitrary Function Generator Programmer Manual
{<phase>|MINimum|MAXimum}
? {MINimum|MAXimum}