Tektronix AFG2021 Programmer's Manual page 112

Command Descriptions
Group
Syntax
Related Commands
Arguments
Examples
TRIGger:SEQuence:SLOPe
Group
Syntax
Arguments
Returns
Examples
TRIGger[:SEQuence]:SOURce
Group
2-94
Trigger
*TRG
TRIGger[:SEQuence][:IMMediate]
None
*TRG
generates a trigger event.
This command sets or queries the slope of trigger signal.
Trigger
TRIGger:SEQuence:SLOPe
TRIGger:SEQuence:SLOPe?
indicates that the event occurs on the rising edge of the external
POSitive
trigger signal.
indicates that the event occurs on the falling edge of the external
NEGative
trigger signal.
POS|NEG
TRIGGER:SEQUENCE:SLOPE POSitive
sets the trigger slope to positive, which triggers on the rising edge of the signal.
This command sets or queries the trigger source for an external trigger signal.
Trigger
AFG2021 Arbitrary Function Generator Programmer Manual
{POSitive|NEGative}