Tektronix AFG2021 Programmer's Manual page 60

Command Descriptions
Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:BURSt[:STATe]
Group
Syntax
Arguments
Returns
Examples
2-42
Source
[SOURce[1]]:BURSt:NCYCles
[SOURce[1]]:BURSt:NCYCles
<cycles>::=<NRf>
where:
<NRf> is the burst count. The burst count ranges from 1 to 1,000,000.
INFinity sets the burst count to infinite count.
MINimum sets the burst count to minimum count.
MAXimum sets the burst count to maximum count.
<cycles>
SOURce1:BURSt:NCYCles 2
sets the CH 1 burst count to 2.
This command enables or disables the burst mode for the specified channel. The
query command returns the state of burst mode.
Source
[SOURce[1]]:BURSt[:STATe]
[SOURce[1]]:BURSt[:STATe]?
ON or <NR1>≠0 enables the burst mode.
OFF or <NR1>=0 disables the burst mode.
<NR1>
SOURce1:BURSt:STATe ON
enables the burst mode for the CH 1.
AFG2021 Arbitrary Function Generator Programmer Manual
{<cycles>|INFinity|MINimum| MAXimum}
? {MINimum|MAXimum}
{ON|OFF|<NR1>}