Tektronix AFG2021 Programmer's Manual page 61

[SOURce[1]]:BURSt:TDELay
Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:COMBine:FEED
Group
Syntax
Related Commands
AFG2021 Arbitrary Function Generator Programmer Manual
This command sets or queries delay time in the burst mode for the specified
channel. It specifies a time delay between the trigger and the signal output. This
command is available only in the Triggered burst mode.
The setting range is 0.0 ns to 85.000 s with resolution of 100 ps or 5 digits.
Source
[SOURce[1]]:BURSt:TDELay
[SOURce[1]]:BURSt:TDELay
<delay>::=<NRf>[<units>]
where:
<units>::=[s | ms | μs | ns]
MINimum sets the delay time to minimum value.
MAXimum sets the delay time to maximum value.
<delay>
SOURce1:BURSt:DELay 20ms
This command sets or queries whether to add the internal noise to an output signal
for the specified channel.
When you specify the internal noise, you can set or query the noise level by
SOURce<3>:POWer[:LEVel][:IMMediate][:AMPLitude] command.
To disable the internal noise add, specify "".
Source
[SOURce[1]]:COMBine:FEED
[SOURce[1]]:COMBine:FEED?
SOURce<3>:POWer[:LEVel][:IMMediate][:AMPLitude]
{<delay>|MINimum|MAXimum}
? {MINimum|MAXimum}
sets the CH 1 delay time to 20 ms.
["NOISe"]
Command Descriptions
2-43