Tektronix AFG2021 Programmer's Manual page 81

[SOURce[1]]:PULSe:HOLD
Group
Syntax
Arguments
Returns
Examples
[SOURce[1]]:PULSe:PERiod
Group
Syntax
Arguments
Returns
AFG2021 Arbitrary Function Generator Programmer Manual
The [SOURce[1]]:PULSe:HOLD command sets the instrument to hold either
pulse width or pulse duty.
The [SOURce[1]]:PULSe:HOLD? command returns WIDTh or DUTY.
Source
[SOURce[1]]:PULSe:HOLD
[SOURce[1]]:PULSe:HOLD?
WIDTh means that the instrument holds the pulse width setting.
DUTY means that the instrument holds the pulse duty setting.
WIDT|DUTY
SOURce1:PULSe:HOLD WIDTh
holds the CH 1 pulse width setting.
This command sets or queries the period for pulse waveform.
Source
[SOURce[1]]:PULSe:PERiod
[SOURce[1]]:PULSe:PERiod
<period>::=<NRf>[<units>]
where:
<NRf> is the pulse period.
<units>::=[ns | μs | ms | s]
<period>
{WIDTh|DUTY}
{<period>|MINimum|MAXimum}
? {MINimum|MAXimum}
Command Descriptions
2-63