Connecting Your Tg789Vac V2 To Your Service Provider's Network - Technicolor TG789vac v2 Setup And User Manual

Modem router
Hide thumbs Also See for TG789vac v2:
Table of Contents

Advertisement

2.1 Connecting your TG789vac v2 to your service
provider's network
Introduction
This section helps you to connect your TG789vac v2 to your service provider's network.
Choose your setup
To connect your TG789vac v2 to the Internet you can either:
• Connect your TG789vac v2 to your service provider's DSL network. In this setup your TG789vac v2 is used as a DSL
gateway. Follow the instructions from
• Place your TG789vac v2 behind another Internet access device (for example, an Optical Network Terminal (ONT), a
cable gateway, etc.). In this setup your TG789vac v2 is used as
setup" on page
DMS3-CTC-25-191 v2.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
"2.1.1 DSL gateway setup" on page
Internet
16.
Internet
15.
MediaAccess Gateway
local
router. Follow the instructions from
Internet Access Device
MediaAccess Gateway
2 Setting up your TG789vac v2
"2.1.2 Local router
14

Advertisement

Table of Contents
loading

Table of Contents