HP 3600 v2 Series Command Reference Manual page 21

Hide thumbs Also See for 3600 v2 Series:
Table of Contents

Advertisement

Eth1/0/9
Eth1/0/10
# Filter the brief interface information to display the line starting with the (s) string and all subsequent
lines.
<Sysname>display interface brief | begin (s)
The brief information of interface(s) under route mode:
Link: ADM - administratively down; Stby - standby
Protocol: (s) - spoofing
Interface
NULL0
Vlan1
When you use the begin keyword to filter the output, the system only searches the Layer 3 interface list or
the Layer 2 interface list. If regular-expression is on the Layer 3 interface list, the system only displays the
line that contains regular-expression, and all subsequent lines on the Layer 3 interface list.
# Display the interfaces in down state and the reasons why they are down.
<Sysname> display interface brief down
The brief information of interface(s) under bridge mode:
Link: ADM - administratively down; Stby - standby
Interface
Eth1/0/1
Eth1/0/2
Eth1/0/3
Eth1/0/4
Eth1/0/5
Eth1/0/6
Eth1/0/7
Eth1/0/8
Eth1/0/9
Eth1/0/10
Table 6 Command output
Field
The brief information of
interface(s) under route
mode:
Link: ADM -
administratively down;
Stby - standby
Protocol: (s) - spoofing
Interface
DOWN auto
A
DOWN auto
A
Link Protocol Main IP
UP
UP(s)
--
UP
UP
192.168.0.80
Link Cause
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
DOWN Not connected
Description
The command displays brief information about Layer 3 interfaces.
Link layer state of the interface:
ADM—The interface has been shut down by the network administrator. To
recover its physical layer state, perform the undo shutdown command.
Stby—The interface is a standby interface.
If the network layer protocol state of an interface is shown as UP, but its link is an
on-demand link or not present at all, its protocol attribute includes the spoofing
flag (an s in parentheses). This attribute is typical of interface Null 0 and the
loopback interfaces.
Interface name.
13
A
1
A
1
Description

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500 hi series

Table of Contents