Super Vlan Configuration Commands; Display Supervlan - HP 3600 v2 Series Command Reference Manual

Super VLAN configuration commands

display supervlan

Syntax
display supervlan [ supervlan-id ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
supervlan-id: Specifies a super VLAN ID, in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display supervlan to display the mapping between a super VLAN and sub-VLANs, and to display
information about these VLANs.
Related commands: supervlan and subvlan.
Examples
# Display the mapping between a super VLAN and sub-VLANs.
<Sysname> display supervlan 2
Supervlan ID :
Subvlan ID :
VLAN ID: 2
VLAN Type: static
It is a Super VLAN.
Route Interface: configured
IPv4 address: 10.153.17.41
IPv4 subnet mask: 255.255.252.0
IPv6 global unicast address(es):
2001::1, subnet is 2001::/64 [TENTATIVE]
Description: VLAN 0002
Name: VLAN 0002
Tagged
2
3-5
Ports: none
191