Mrp Timer Leave - HP 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
timer-value: Join timer value (in centiseconds). The Join timer must be less than half the Leave timer, and
must be a multiple of 20.
Description
Use mrp timer join to set the Join timer.
Use undo mrp timer join to restore the default.
By default, the Join timer is 20 centiseconds.
You will fail to restore the default Join timer if the default Join timer is not less than half the Leave timer.
Related commands: display mvrp running-status and mrp timer leave.
Examples
# Set the Join timer to 40 centiseconds. (Suppose the Leave timer is 100 centiseconds)
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] mrp timer join 40

mrp timer leave

Syntax
mrp timer leave timer-value
undo mrp timer leave
View
Layer 2 Ethernet port view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
timer-value: Leave timer value (in centiseconds). The Leave timer must be greater than two times the Join
timer, less than the LeaveAll timer, and a multiple of 20.
Description
Use mrp timer leave to set the Leave timer.
Use undo mrp timer leave to restore the default.
By default, the Leave timer is 60 centiseconds.
You will fail to restore the default Leave timer if the default Leave timer is not greater than two times the
Join timer or not less than the LeaveAll timer.
Related commands: display mvrp running-status, mrp timer join, and mrp timer leaveall.
Examples
# Set the Leave timer to 100 centiseconds. (Suppose the Join and LeaveAll timer use their default settings)
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
272