HP 3600 v2 Series Command Reference Manual page 119

Field
CIST Root/ERPC
CIST RegRoot/IRPC
Root ID / RPC
CIST RootPortId
Root PortId
BPDU-Protection
Bridge Config-
Digest-Snooping
TC or TCN received
Time since last TC
[FORWARDING]
[DISCARDING]
[LEARNING]
Port Protocol
Port Role
Port Cost(Legacy)
Desg. Bridge/Port
Port Edged
Point-to-point
Transmit Limit
Protection Type
Description
CIST root ID and external path cost (the path cost from the device to the CIST root).
CIST regional root ID and internal path cost (the path cost from the device to the
CIST regional root).
VLAN root ID and root path cost (the path cost from the device to the root).
CIST root port ID. "0.0" indicates that the device is the root and there is no root
port.
VLAN root port ID. "0.0" indicates that the device is the root and there is no root
port.
Global status of BPDU protection.
Global status of Digest Snooping.
Number of TC/TCN BPDUs received in the MSTI or VLAN.
Time since the latest topology change in the MSTI or VLAN.
The port is in forwarding state.
The port is in discarding state.
The port is in learning state.
Status of the spanning tree feature on the port.
Port role, which can be Alternate, Backup, Root, Designated, Master, or
Disabled.
Path cost of the port. The field in parentheses indicates the standard (legacy,
dot1d-1998, or dot1t) used for port path cost calculation.
•
Config—Configured value.
•
Active—Actual value.
Designated bridge ID and port ID of the port.
The port ID displayed is insignificant for a port which does not support port
priority.
The port is an edge port or non-edge port.
•
Config—Configured value.
•
Active—Actual value.
The port is connected to a point-to-point link or not.
•
Config—Configured value.
•
Active—Actual value.
Maximum number of packets sent within each hello time.
Protection type on the port:
•
Root—Root guard.
•
Loop—Loop guard.
•
BPDU—BPDU guard.
•
BPDU/ROOT—BPDU guard and root guard.
•
None—No protection.
111