Display Interface - HP 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
text: Specifies the interface description, a string of 1 to 80 characters.
Description
Use description to set a description for an interface. For example, you can include information such as
the purpose of the interface for the ease of management.
Use undo description to restore the default setting.
By default, the description of an interface is interface-name Interface. For example, the default
description of Bridge-Aggregation1 is Bridge-Aggregation1 Interface.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to connect to the lab.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab

display interface

Syntax
display interface [ bridge-aggregation | route-aggregation ] [ brief [ down ] ] [ | { begin | exclude |
include } regular-expression ]
display interface { bridge-aggregation | route-aggregation } interface-number [ brief ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
bridge-aggregation: Displays information about Layer 2 aggregate interfaces.
route-aggregation: Displays information about Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number. The value range for the
interface-number argument is the set of all existing aggregate interface numbers.
brief: Displays brief interface information. If you do not specify this keyword, this command displays
detailed interface information.
down: Displays information about interfaces in the DOWN state and the causes. If you do not specify
this keyword, this command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
76