Port Bridge Enable; Port-Group Manual - HP 3600 v2 Series Command Reference Manual

Description
Use port auto-power-down to enable auto power-down on Ethernet interfaces for energy efficiency.
Use undo port auto-power-down to restore the default.
By default, auto power-down is disabled on Ethernet interfaces.
Examples
# Enable auto power-down on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port auto-power-down
# Enable auto power-down on all member ports of port group group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1] group-member ethernet 1/0/1
[Sysname-port-group-manual-group1] group-member ethernet 1/0/2
[Sysname-port-group-manual-group1] port auto-power-down

port bridge enable

Syntax
port bridge enable
undo port bridge enable
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use port bridge enable to enable bridging on a Layer 2 Ethernet interface.
Use undo port bridge enable to disable bridging on the Ethernet interface.
By default, bridging is not enabled on Layer 2 Ethernet interfaces.
Examples
# Enable bridging on Layer 2 Ethernet interface Ethernet1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] port bridge enable

port-group manual

Syntax
port-group manual port-group-name
40