HP 3600 v2 Series Command Reference Manual page 232

As an individual port in the form of interface-type interface-number
•
• As a port range in the form of interface-type interface-number1 to interface-type interface-number2,
where the end-port number specified by interface-number2 must be greater than the start port
number specified by interface-number1.
Description
Use reset garp statistics to clear the GARP statistics on the specified ports. If no ports are specified, this
command clears the GARP statistics on all ports.
The cleared statistics include the statistics about GVRP PDUs sent, received, and dropped.
Related commands: display garp statistics.
Examples
# Clear the GARP statistics on all ports.
<Sysname> reset garp statistics
224