HP 3600 v2 Series Command Reference Manual page 18

Field
Untagged VLAN ID
Peak value of input
Peak value of output
Last 300 seconds input: 0
packets/sec 0 bytes/sec
Last 300 seconds output: 0
packets/sec 0 bytes/sec
Input (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0
multicasts, 0 pauses
Input (normal): 0 packets, - bytes
0 unicasts, 0 broadcasts, 0
multicasts, 0 pauses
input errors
runts
giants
- throttles
frame
- overruns
Description
VLANs for which the interface sends packets after removing VLAN tags.
Peak value of inbound traffic, in Bps.
Peak value of outbound traffic, in Bps.
Average rate of input and output traffic in the last 300 seconds, in pps
and Bps.
Inbound traffic statistics (in packets and bytes) for the interface. All
inbound normal and abnormal packets (including unicast, broadcast,
and multicast), and pause frames were counted.
Inbound traffic statistics (in packets and bytes) for the interface. All
inbound normal packets (including unicast, broadcast, and multicast),
and pause frames were counted.
Inbound packets with errors.
Inbound frames shorter than 64 bytes, in correct format, and containing
valid CRCs.
Inbound frames larger than the maximum frame length supported on the
interface.
•
For an Ethernet interface that does not permit jumbo frames, giants
refer to frames larger than 1536 bytes (without VLAN tags) or 1540
bytes (with VLAN tags).
•
For an Ethernet interface that permits jumbo frames, giants refer to
frames larger than the maximum length of Ethernet frames that are
allowed to pass through, which is configured when you configure
jumbo frame support on the interface.
The number of times that the port shut down due to buffer or CPU
overload.
Total number of inbound frames that contained checksum errors and a
non-integer number of bytes.
Number of packet drops because the input rate of the port exceeded the
queuing capability.
10